WE WANT YOU!

Our team at Not Just A Jewel is creating game changing, empowering products with and for all people who love smart design and who want to move around freely and independently wherever and whenever they want!

Sounds like something you would love to be a game changing part of?

Then don’t hesitate to get in touch with us. Send us your application with the position and your CV or LinkedIn profile via email. We look forward to getting to know you!

Assembly & Testing Manager (m/f/d)

We are searching for an assembly and testing manager. You will support the new product development as well as sustaining operations and ensuring the contract manufacturer readiness for high volume production. You will setup the test procedures together with a software team to develop the approach for testing and assembly. You will bring your expertise to drive all technical operational issues related to product integration and tests processes to ensure effective closure of all issues to enable operational success of the entire new product introduction cycle.

Your Tasks:

  • ​Facilitate production of electrical and mechanical components of hardware

  • Set up and assemble, test and install hardware

  • Perform testing campaigns according to procedures, specifications, and test instructions

  • Collaborate with a multidisciplinary team (electrical and mechanical engineers) and operations to efficiently build parts on schedule

  • Assess design requirements and production feasibility, revise production processes, procedures and equipment

  • Drive design for manufacturing and assembly during new product development and improvement cycles

  • Conduct tests with electronics, solder & assemble PCBs, test PCBs

  • Perform minor SW updates

  • Conduct assembly and test procedures of the bracelet

Your Profile:

  • ​BS or higher in engineering discipline

  • At least 1+ years of experience in engineering and manufacturing

  • Excellent project management skills

  • Utilises a hands-on approach to engineering and problem-solving

  • Direct experience supporting functional engineering teams a plus (ME, EE, TE, DFX, etc.)

  • Shown bottom line project management experience (Planning, Cost & Delivery)

  • Required to understand and tolerance stack ups for assemblies and part level

  • Desire and ability for problem solving and debugging

  • Experience in introducing products into manufacturing, or high volume production is a large plus

  • Knowledge of Altium designer and Fusion 360

  • Knowledge of C / C++

Embedded Software Developer (m/f/d)

 

We are searching for an embedded software developer. You will support the development of the software packages for new product including wireless connectivity via BLE and LTE channels. You will have an opportunity to design, architect and implement IoT functionality into a jewelery device enabling empowerment and safety.

Your Tasks

  • Design and implementation of firmware for SoC bring up, validation, and test

  • Enhancing and maintaining the development and debug environments, tools and methodologies

  • Write high quality structured bare metal software for embedded applications

  • Designing, coding and testing features of an IoT device

  • Test connected devices to prove out their abilities and limitations regarding configuration, security and efficacy

Your Profile

 

  • 3+ years of embedded software experience, including debugging and characterization

  • Experience with wireless connectivity SoC (BLE, LTE from Nordic)

  • Experience in programming languages such as: C, C++, Python, etc.

  • Experience using laboratory equipment (e.g., logic analyzer, digital oscilloscope)

  • Experience reading and working from device and board schematics

  • Understanding of radio system design, simulation, and characterization

  • Knowledge of wireless standards and protocols

  • Experience implementing connected devices

  • Experience with short and long term communication methods such as (LORA, Bluetooth, Zigbee, LTE, etc)

  • Strong attention to detail, organizational skills, time management

Industrial Engineer (m/f/d)

We are looking for someone who is passionate about engineering and design. The role will require the ability to handle multiple project parts simultaneously (prototyping, production, manufacturer communications) with demanding schedule requirements. A proven ability to deliver design solutions while balancing multiple priorities is key. Experience in working closely with suppliers is important as well.

Your Tasks

 

  • Sketching of design solutions for wearable devices

  • Prototyping and testing of design hypothesis

  • CAD development based on sketches, renders preparation

  • Manufacturing files preparation, organization of production, communication with manufacturers and support throughout the process

  • Components tests and verification

  • Assembly processes development

Your Profile

  • Engineering degree (Mechanical / Aerospace / Mechatronics) with relevant professional experience

  • Working knowledge of 3D CAD modeling systems and workflow (fusion 360), production files generation knowledge

  • Expert knowledge of drafting best practices

  • A thorough understanding of stress-strain relationships, static mechanics (determinate and indeterminate 
systems)

  • An understanding of kinematics and mechanism design

  • An understanding of metal and plastic materials science, and wear principles

  • Working understanding of plastic part design, molded part design

  • Solid knowledge of Fusion 360

  • Understanding of materials and coatings

  • Experience with wearables and jewelery is desirable

  • Experience in introducing products into manufacturing, or high volume production is a large plus

Hardware Developer (m/f/d)

We are searching for a hardware developer with solid electrical and basic programming skills. You will drive technical projects, from prototypes to mass production. Specifically, you will design rigid flex PCB schematics, guide layout, and debug PCB boards. Experience working in a wearable segment is desiarable

Your Tasks

  • Design and development of electrical circuits, calculation of components

  • Procurement of components and BOM selection

  • Development of schematics

  • Prototyping and design verification

  • Layout development for flex rigid PCB and production files preparation

  • Development of test software to verify the PCB integrity

Your Profile

  • 1+ years work experience

  • A degree in electrical engineering

  • Hands on experience with schematics, PCB layout, oscilloscope debugging, EMC, power management

  • Experience with: embedded systems and various communication protocols (example: SPI, I2C, UART, MIPI, DSI, DP)

  • Experience with consumer electronics

  • Experience with IoT SoCs: bluetooth modules, LTE modems, GPS modules

  • Soldering and debugging skills

  • Basic knowledge of programming (C / C++)

  • Knowledge of Altium designer and Fusion 360

  • Experience in introducing products into manufacturing, or high volume production is a large plus

Senior Swift Developer (m/f/d)

We are searching for a Senior iOS Engineer who is interested in making an impact on the development of the architecture. We are building a mobile application that exchanges data via Bluetooth with an external device and communicates with our API. You will be responsible not only for implementing regular features but also for leading the overall changes and improvement in current architecture.

Your Tasks

  • Play a critical role in architecture, design and development of features across our app

  • Provide technical considerations and recommendations

  • Designing, building and maintaining new feature

  • Develop custom UI and animations

Your Profile

  • Experience working closely with the UX/UI designer and Product Owner

  • Experience to handle communication between an iOS app and external device via Bluetooth

  • 3+ years of building iOS applications in Swift

  • Experience in full cycle of application development

  • Understanding of OOP, SOLID

  • Familiar with RESTful APIs to connect iOS applications to back-end services, Swagger

  • Experience with iOS frameworks such as CoreLocation, CoreBluetooth, UserNotifications

  • Experience in integrating with third party open source libraries (Alamofire)

  • Understanding of architectural patterns (MVC, MVVM)

  • Git, Jira

Founder Associate (m/f/d)

We are searching for a Founder Associate with a background in business, industrial engineering or similar. You will play a crucial role in driving key initiatives in operations, product, finance, marketing, and general business development. Setting up all operations, building the team as well as developing business and sales activities. Specially, you will closely work together with the founders. At the same time you will be a part of our international team and help shape the future of our young, mission-driven company.

Your Tasks

  • Executing and setting up the processes for our operations (e.g. procurement, recruiting, onboarding)

  • Handle all financial administration matters for our management

  • Manage complex calendars and coordinate meetings with internal and external teams including preparation of meetings in different ways

  • Preparation of investor meetings

  • Generation of presentations as a basis for decision-making for founding team

  • Administrative support of management team and founders

Your Profile

  • You are currently enrolled as a student at a german university

  • Your are fluent in German, both written and spoken

  • You are ready to ‘jump in’ at any position where you’re needed

  • You are obsessed with creating value for the customer to create awesome customer experiences

  • You have strong analytical, decision-making and problem-solving skills

  • You value social sustainability and are excited to contribute to a more diversified and inclusive startup industry

  • You are available for at least 6 months

Business Development Intern (m/f/d)

We are searching for a Business Development Intern (m/f/x) with a background in business, marketing, entrepreneurship, STEM, or similar. You will play a crucial role in setting up all operations, building the team as well as developing business and sales activities. Specifically, you will closely work directly together with the Managing Directors. At the same time you will be a part of our international team, and help shape the future of our young mission-driven company.

Your Tasks

  • Executing and setting up the processes for our operations (e.g. procurement, recruting, onboarding)

  • Identify and prospect new customer segments and strategies to reach them

  • Shape product development; user testing/interviews/data Analysis

  • Assist the global marketing team finding the optimal online marketing mix

  • Set up BI-dashboards to derive global reports on financial/product data

  • Strategically define the overall market entry in Germany and further international roll-out

Your Profile

  • You are currently enrolled as a student at a german university

  • You are fluent in German, both written and spoken

  • You are ready to get your hands dirty and ‘jump in’ at any position where you’re needed

  • You are obsessed with creating value for the customer and are ready to go that extra mile to create awesome customer experiences

  • You value social sustainability and are excited to contribute to a more diversified and inclusive startup industry

  • You are available for at least 3 months

GET IN TOUCH

 

For any questions, feedback and ideas please don't hesitate to contact us through jobs@njaj.eu